Bronze
Balls
Much
like brass balls, Aluminum Bronze Balls provide excellent service
in resisting corrosion in water. Cost is moderate in comparison
with other types of large-diameter, corrosion-resisting balls.
Large
size aluminum bronze balls are widely used by manufacturers of valves,
spraying machines, pumps and similar equipment. These balls have many of
the characteristics and advantages afforded by brass balls, however,
they are offered in a range of larger sizes.
 |
|
|
|
Balls
per Pound
|
|
Size
|
Balls
per Pound
|
|
Inches
|
Millimeters
|
|
1
|
25.400
|
6.97
|
|
1
1/4
|
31.750
|
3.57
|
|
1
1/2
|
38.100
|
2.07
|
|
1
3/4
|
44.450
|
1.30
|
|
2
|
50.800
|
0.871
|
|
|
|
|
Material
Analysis:
Bronze
balls are made from the following special chemical analysis:
CDA-624
material is available upon request.
|
|
|
|
|
Material
|
CDA
|
Federal
|
Military
|
ASTM
|
UNS
|
AMS
|
Military
and
Gov't Stds.
|
|
Brass
|
260
|
QQ-W-321c
Comp.7
|
MILW-6712A
Type II
|
B134-52
Alloy 7
|
C-26000
|
4712A
4713A
|
MS
19062
CCAX2
|
|
|
|
|
|
Chemical
Analysis:
Alumimun...................................................................9.0%
to 11.0%
Iron............................................................................2.0%
to 4.0%
Nickel........................................................................5.5%
maximum
Manganese.................................................................1.5%
maximum
Copper.......................................................................Balance
|
|
|
Mechanical
Properties:
Hardness
as measured on parallel flat surfaces is Rockwell “C”
minimum.
Tensile
Strength............................................................95,000psi
Yield
Strength................................................................47,000psi
Elongation in two
inches..............................................12%
Modulus of
elasticity.....................................................12,000,000
to 19,000,000 psi
Density...........................................................................0.275
lbs/cu. in.
© Copyright 2005 Hoover
Precision Products, Inc., All Rights Reserved
|
|
